Guide To High Pressure Cleaning

Learn The Importance of Pressure Washing

Man With High-Pressure Hose

Never judge a book by its cover. Most people assume that their carpets are clean because they seem so. Dirt can get into the fiber leaving it lumpy and when combined with oil residues, it glues itself on the carpet. They vacuum their carpets forgetting that professional care is at times needed. Carpets that may look spotless may be a ground for breeding bacteria and allergens. With a heap of dust and soil below the surface.

High-pressure carpet cleaning requires proper equipment to deal with the carpets. The equipment ensures the carpets are deep cleaned and all possible allergens removed. To better understand this method, we’re going to discuss it in detail.

Steps to High-Pressure Carpet Cleaning

1. Pre-inspection of the carpet

Having a check on the condition of the carpet before cleaning is important. Look at the types of stains, carpet fibres and soiling capacity of the carpet. It is in this step that questions such as what caused a particular stain are likely to arise.

This will help know the specific stain removers and detergents to use. For example, there is a specific stain remover for pet urine that can do away with the odour. Pre-inspection will also determine the areas to pre-treat when cleaning the carpets.

2. Commercial vacuuming

Vacuuming removes bonded insoluble dry soil. Failure to vacuum before cleaning results in a muddy mould when water mixes with soil. This will make the cleaning process difficult and also slow the rate of work. 

3. Pre-treatment

High traffic areas such as pathways are sprayed with a biodegradable traffic lane treatment. This makes it easier to extract stain or soil off the carpet material. The choice of cleaning agents will depend on the type of filth and stains to be treated.

4. Agitation

Agitating makes it easy to loosen excess dirt and particles in the carpet that have accumulated for months. Agitation enables the solution to reach beneath the carpet. A hand brush or a rotary machine with soft bristles is enough for the agitation process. The choice of the tool should depend on the pillage of the carpet. 

5. Extraction and rinsing

Once the soil has loosened, hot water extraction cleaning is applied. The extraction equipment emits a spray of pressurized water followed by a high-powered vacuum. The pressurized water flushes the carpet pile dislodging all the dirt. Keep an eye on the pressure and heat. You should regulate both to avoid over-wetting the carpet.

6. Carpet drying

You can consider setting fans to speed the rate of drying. Fast-drying the carpet after cleaning reduces the chances of mold and mildew growth. 

High-velocity air movers and turning HVAC systems in the property can help in drying the carpet. In this process, no one should walk over the carpet until it is completely dry. Stepping on it when wet will make it dirtier.

7. Perform a post-cleaning inspection

Is your carpet fully clean and dry? Remember to carry out this step which most people ignore. Having a final check-up on the carpet is not a bad idea. It helps in identifying permanent stains and the overall results of the cleaning.

High-Pressure Hose Closeup

Factors to consider when using high-pressure carpet cleaning

Condition of the carpet

The type, quality and state of your carpet should inform your decision. How dirty is your carpet? If your carpet is too filthy, then a pressurized water cleaning can help you. If you haven’t cleaned your carpet for months, high-pressure cleaning can help you. The water under pressure can penetrate the carpet and push out all the dirt. 

Too strong stains such as pet urine also need high pressure to remove. Otherwise, your carpet will remain stained even after cleaning. 

Pile height

Shaggy carpets have long piles which are likely to attract dirt, dust and debris to get stuck beneath. Vacuuming often may not get rid of all the dust on the base of the carpet. Thus, using high pressure on carpet cleaning will absolutely help.

Textile material

Carpets have different types of fabric materials. Identifying the type of carpet material you are dealing with will help to know the right method to clean it. 

It is hard for water to penetrate the fluffy carpets. Thus, a high-pressure cleaning method may be the only help. With a pressure of 100 to as high as 900 PSI, you can dislodge impurities hidden deep inside the carpet. 

Carpets with delicate materials such as nylon need low pressure to avoid damage. And so, if you have such a carpet, this method may not be the best for you. 

Washing of White Carpet

FAQS

Why does my carpet look worse after cleaning?

There are several things that can make your carpet appear terrible even after cleaning. One, it may have become hard due to dirt accumulation. If this is the cause, you can try restoring it by fluffing the fiber up using a spoon. 

Another thing may be that you didn’t use the right method to clean it. So, after drying all the stains reappear again. 

After how long should I have my carpet cleaned?

It is advisable to vacuum your carpet frequently. However, for professional intensive cleaning, 6 months is enough. Coupled with proper maintenance, your carpet will last long without endangering your family and pets. 

Why is my carpet so dirty?

Carpets attract all manner of nasty stuff from dirt, pet hairs, urine and debris from outside. You should be able to tell your carpet major pollutants by looking at it. If much of the dirt is soil particles, then, that may be from the shoes. If your carpet looks more stained, then the problem may be spillage from kids or pets’ urine. 

Conclusion

If not well maintained, your carpet will eventually fade and get worn out. Having clean carpets reduces the risk of catching colds and other health issues. Dirty carpets can hinder airflow in your home. 

The first duty towards achieving a clean home is identifying the right cleaning method for your carpet. High-pressure cleaning is one of the methods that can leave your carpet spotless. It’s the best for too shaggy and piled carpets.