Ultimate Guide to Cleaning Your Own Carpets
The DIY Guide to Clean Your Carpet in 10 Simple Steps – Updated 2022
Everyone wants to have nice and clean-looking carpets don’t they? However, paying for a professional crew to come in can cost a bit of money.
Some of us are ok with that, others would rather do it themselves. There are numerous advantages to cleaning your carpet and the biggest one is it will not cost you much at all.
In this DIY carpet cleaning article, we will give you a guide on how to cleaning your carpets in your home.
When it comes to cleaning your carpet, the one piece of equipment that you should get for best results is a steam carpet cleaning machine. What is it? Essentially it is a vacuum cleaner that uses hot water to get rid of stains on your carpet. The heat from the machine helps get rid of stains and dirt on your carpet.
The main reason you should use a steam cleaner is that it gets deep into the carpet fabrics where others do not. Also because of the heat, it will help get rid of any germs that cause diseases without the use of chemicals.
Here are some steps to follow when you are looking at cleaning your carpets
Step 1. Move your furniture
You are going to want to move your furniture so you can get access to ALL of your carpets for cleaning. Move any furniture you have so you can clean the parts of your carpet that you want.
Step 2. Vacuum the room
Vacuuming the room you want to clean will help remove any debris or loose dirt like dust or hair and a bit of carpet that has spills on them. Do not just do a small area, if you are going to vacuum, vacuum the WHOLE room for best results.
Step 3. Use a Lint Brush to Remove Pet Fur
After you’ve vacuumed, survey the room and pick up any excess pet fur that the vacuum missed. A lint roller is great for this as it’s sticky and may even pick up more that you didn’t initially see. It’s recommended to use a lint roller in between deep cleanings to ensure the carpet fibers don’t get too clogged.
Step 4. Use Furniture Lifts or Pads
Now that all loose particles have been taken care of, you’re almost ready to start the carpet cleaner. However, it’s helpful to place furniture lifts or protective pads near the legs of any furniture in the room. This will keep water from the cleaner from pooling near the legs and causing potential damage.
Step 5. Pre-treatment
What this is is essentially using less effective cleaning methods to get rid of the less stubborn stains in your carpet. Leaving the steam cleaner to tackle the stubborn stains.
Step 6. Spot Clean Where Needed
Spot cleaning should be done before and after you clean your carpets. Before cleaning, wait five minutes after spot treatment before running the carpet cleaner. After your initial clean, wait for the room to dry completely before examining the result. If you find there are still spots with stains, move accordingly.
Step 7. Know your steam cleaner inside and out
Read the manual that comes with it. With most machines, they will have a variety of different settings for different surfaces in your house. Make sure you have the machine set to the right carpet cleaning mode.
Step 8. Time to start cleaning!
When it comes time to start cleaning, start in a corner and then go around the rest of the room in straight lines. You should go back and over again if you want to do a thorough clean. You should make sure the whole carpet is clean before you let it dry. Do this for all rooms you want to clean.
Step 9. Let the carpet dry
For best results, allow as much air into the room as possible. If you have a fan in the room, turn it on, open the door. When air is allowed to blow on it, carpets dry a lot faster. As a rule, leave them for at least two hours.
Step 10. Putting your cleaning machine away
After you have finished cleaning all the carpets in your house, you will need to empty the water tank. After each time you use the machine, rinse the tank every time so it is fresh when you go to use it next.
What is the most effective DIY carpet cleaning method?
The most popular and effective is using a Steam Cleaning machine. It gets the best results however if you do not have one, you will have to buy one.
Does vinegar clean carpet?
Yes, it does. It gets rid of odors in your carpet and loosens any stains that you have in your carpet fibres. For best results, add water and vinegar into a bottle and spray it on the stains on your carpet.
Cleaning your carpets is no longer the back-breaking job that it used to be years ago. With the improvements in technology now, the machines do all the work and you just push them along. No matter how you choose to clean your carpets, always think of the environment around you if you decide to use chemicals.